| Engines
and Props |
|
|
|
|
| IO-550N19B |
|
310
hp, Continental 12 volt 60 amp (fuel injected) |
|
$52,975.00
Each |
| IO-550N34B |
|
310
HP, Continental 24 volt, 60 amp (fuel injected) |
|
$53,900.00
Each |
| IO-550N8B |
|
310
HP, Continental 24 volt, 100 amp (fuel injected) |
|
$53,900.00
Each |
| IO-550N20B |
|
310
hp, Continental Platinum 12 volt 60 amp (fuel injected) |
|
$59,425.00
Each |
| IO-550N21B |
|
310
hp, Continental Platinum 24 volt 60 amp (fuel injected) |
|
$59,425.00
Each |
| IO-550N22B |
|
310
hp, Continental Platinum 24 v, 100 amp (fuel injected) |
|
$59,425.00
Each |
| R-IO550 |
|
IO-550N,
Factory Remanufactured Engine (No Core Required. Same tolerances
as new engine. Some parts may be rebuilt by TCM. New Cylinders
included). |
|
$43,500.00
Each |
| R-TSIO550E |
|
TSIO-550E,
Factory Remanufactured Engine (No Core Required. Same tolerances
as new engine. Some parts may be rebuilt by TCM. New Cylinders
included). |
|
$74,500.00
Each |
| TSIO-550E1B |
|
350
hp, Continental, 12 volt (twin turbo charged/dual intercooler)
|
|
$87,800.00
Each |
| TSIO-550E2B |
|
350
hp, Continental, 24 volt, 60 amp (twin turbo charged/dual
intercooler) |
|
$87,800.00
Each |
| TSIO-550E3B |
|
350
hp, Continental, 24 volt,100 amp (twin turbo charged/dual
intercooler) |
|
$87,800.00
Each |
| MTV-14-D/198-30A |
|
MT
Propeller TSIO-550 (4 blade, constant speed, 75" diameter..,
60 lbs.) *Crating fee and/or UPS fee additional |
|
$12,650.00
Each |
| HC-H3YF-2UF/FC7693DF |
|
Hartzell
Propeller (IO-550 & TSIO-550) (3-blade, scimitar, full
feathering, constant speed) 78 " Diameter, 87.5 LBS **Feathering
propellers require a different prop governor than non-feathering
propellers. |
|
$12,700.00
Each |
| HC-H3YF-1RF/F7693DF |
|
Hartzell
Propeller (IO-550 & TSIO-550) (3-blade, scimitar, non
feathering, constant speed) 78 " Diameter, 73 LBS (with
IV cowling) |
|
$11,455.00
Each |
| SP-ASSY-550 |
|
Spinner
Assembly Kit (Composite spinner non-feathering propeller only.
Assembly required) |
|
$450.00
Each |
| C-6446-1P |
|
Polished
Metal Spinner for use with Hartzell non-feathering Prop |
|
$1,745.00
Each |
| D-3273-2P |
|
Polished
Metal Spinner for use with Hartzell feathering Prop |
|
$1,745.00
Each |
|
|
|
|
|
| Airframe
Accessories |
|
|
|
|
| LIVA-XTDFUEL |
|
Extended
Fuel Option (Extends fuel cap. to 110 gal.) Order through
Lancair when kit is purchased. |
|
$1,500.00
Each |
| 1048/1049-N-EFB |
|
Winglets
Fastbuild, E-glass |
|
$2,250.00/set |
| 1048/1049-N-CFB |
|
Winglets
Fastbuild, Carbon |
|
$3,125.00/set |
| 281-0013 |
|
Wingtips,
New "Legacy Style" |
|
$1,600.00/set
|
| PF-1-A |
|
Precise
Flight Speed Brake Assembly 12/14 volt |
|
$3,550.00
Each |
| PF-2-A |
|
Precise
Flight Speed Brake Assembly 24/28 volt |
|
$3,550.00
Each |
| LIV-PT-SYS |
|
Pitot/Static
System (Nylon fittings & tubing used to install pitot
static system. Aluminum fittings & tubing are included
in the kit. Easier to bend than aluminum) |
|
$85.00
Each |
| LA650 |
|
External
Lighting System 12/14 volt |
|
$950.00
Each |
| LA650-28 |
|
External
Lighting System 24/28 volt |
|
$950.00
Each |
| 314 |
|
Retractable
Step Assembly |
|
$500.00
Each |
| SOUND-IV |
|
Soundproof
Installation Kit |
|
$275.00
Each |
| LIVF-LL-12V |
|
Landing
Light Kit (12/14 volt installed in lower cowl) |
|
$50.00
Each |
| LIVF-LL-24V |
|
Landing
Light Kit (24/28 volt installed in lower cowl) |
|
$65.00
Each |
| 800-0000 |
|
Landing
Light Kit 12/14 volt, 2.2" diameter, installed in cowl
inlets (2" lights included) |
|
$225.00
Pair |
| 800-0004 |
|
Landing
Light Kit 24/28 volt, 2.2" diameter, installed in cowl
inlets (2" lights included) |
|
$225.00
Pair |
| LIVF-BP-12 |
|
Boost
Pump Kit 12/14 volt |
|
$775.00
Each |
| LIVF-BP-24 |
|
Boost
Pump Kit 24/28 volt |
|
$965.00 Each |
| 1122-A |
|
Pressure
Bulkhead Frame (Pre-molded pressure bulkhead frame used to
attach pressure bulkhead.) |
|
$750.00
Each |
| 492-A |
|
Pre-Fabricated
Hydraulic Line Kit - Aft Kit (Pre-bent aluminum hydraulic
lines for main gear aft of the main spar used for flaps, brakes
and gear.) |
|
$750.00
Each |
| 493-A |
|
Pre-Fabricated
Hydraulic Line Kit - Forward Kit (Pre-bent aluminum hydraulic
lines for main gear forward of the main spar used for flaps,
brakes and gear.) |
|
$725.00
Each |
| 741 |
|
Internal
Brake Line Assembly (This option replaces the nylo flow brake
fluid tubing in the gear leg with stainless steel tubing.
Includes hardware and instructions. Included in kits shipped
after 7/1/04.) |
|
$500.00
Each |
| 35515-0010 |
|
Overhead
Blower 12 volt (Blower is an option for the IV. Included in
the IV-P kit. Is not required with A/C.) |
|
$111.00
Each |
| 36740-0010 |
|
Overhead
Blower 24 volt (Blower is an option for the IV. Included in
the IV-P kit. Is not required with A/C.) |
|
$100.00
Each |
| 9-22080A |
|
Cabin
Heat System IV |
|
$745.00
Each |
| 9-22090A |
|
Cabin
Heat System IV-P |
|
$560.00
Each |
| KEV0110 |
|
Screw
Mount Eyeball Vents (4-6 used. Not required with A\C) |
|
$120.00
Each |
| KEC0145 |
|
Push
Pull Elevator Compensator 2 required (Replaced rubber pressure
boots for elevator compensator. Required if A/C is purchased.
Included in kits delivered after 04/01/04.] |
|
$375.00
Each |
| 800-0007 |
|
Remote
Baggage Door Latch Assembly (Open baggage door from inside
cabin.) |
|
$375.00
Each |
| 802-0001 |
|
Remote
Oil Door (Open oil door from inside cabin.) |
|
$225.00
Each |
| RD-066-A |
|
Internal
Rudder Assembly |
|
$585.00
Each |
| 1114 |
|
Support
for Internal Rudder Bellcrank (pre-made shelf to hold bellcrank,
otherwise made with phenolic block supplied in kit) |
|
$100.00
Each |
| 280-0000 |
|
Vertical
Stabilizer Extension (Increases the surface area by extending
the leading edge approx. 3") |
|
$600.00
Each |
| RG-35-12 |
|
Battery
12/14 volt |
|
$158.00
Each |
| RG-24-11M |
|
Battery
24/28 volt |
|
$327.00
Each |
| RG-35XC-12 |
|
Battery
12 volt (with extra cranking) |
|
$172.00
Each |
| EOS-180 |
|
Emergency
Oxygen |
|
$660.00
Each |
| KEG0084 |
|
Emergency
Main Gear Down (Uses an accumulator. This option replaces
the hand pump that comes with the kit. Pressure from the accumulator
will extend landing gear. This option has a weight increase
of approx. 35 lbs.) |
|
$350.00
Each |
|
800-0012 |
|
Air
Conditioner/Piston Engine (Overhead mounted evaporator. engine
driven system), 12 Volts |
|
$6,995.00
Each |
|
800-0024 |
|
Air
Conditioner/Piston Engine (Overhead mounted evaporator. engine
driven system) 24 Volts |
|
$6,995.00
Each |
| 222-0005-A |
|
AeroTrak
L-4 Seats - Pilot (New high strength seats designed with headrest
weldment, 4 recline detents, preformed tempure cushion) |
|
$1,995.00
Each |
| 222-0001-A |
|
AeroTrak
L-4 Seats - Co Pilot (New, high strength seats designed with
headrest weldment, 4 recline detents, preformed tempure cushion) |
|
$1,995.00
Each |
| 222-0008-A |
|
Airbag
Seat Belts (Available in black only, Pilot\Co-pilot only,
includes seat belts.) |
|
$4,390.00
Pair |
| KDS0140 |
|
3
Point Inertial Reel Front Seat Belt Black (If ordered at time
of kit order, a $95.00 credit for each will be applied.) |
|
$325.00
Each |
| KDS0141 |
|
3
Point Inertial Reel Front Seat Belt Special Color |
|
$350.00
Each |
| 707-02-SP |
|
Rear
Seat Belt Special Color |
|
$80.00
Each |
| CI122 |
|
Com
1 Antenna, preferred, |
|
$195.00
Each |
| CI122 |
|
Com
2 Antenna, preferred, external |
|
$195.00
Each |
| CI158C-2 |
|
Nav
1 (VOR/GS) Cat Whisker Antenna, (Exterior Vertical Stabilizer) |
|
$235.00
Each |
| SA-004R |
|
Nav
2 Antenna, (right wing tip) |
|
$91.00
Each |
| CI601 |
|
Com
Splitter (Needed if 1 antenna is being used for 2 Com radios) |
|
$690.00
Each |
| SA-009 |
|
Marker
Beacon Antenna |
|
$55.00
Each |
| CI305 |
|
Transponder/DME
Antenna |
|
$155.00
Each |
| P-300C-11'4 |
|
Electronics
Int'l Fuel Probe 11'4" 2 required |
|
$195.00
Each |
| 3010012 |
|
Vision
MicroSystems Fuel Probe 12' 2 needed |
|
$430.00 Each |
|
|
|
|
|
| Firewall
& Engine Fastbuild Program |
|
|
|
|
| FE905 |
|
Engine
Fastbuild TSIO-550 (Non-pressurized) Lancair installs baffling,
hoses, prop governor, vibration isolators, attach control
cable brackets, modify turbo bracket, torque and inspect.
Price does not include powder coating or probe install. If
Engine Fastbuild is paid for at the time of kit delivery,
a $2,000 credit will apply to the price of your engine when
ordered through Lancair. |
|
$10,250.00
Each |
| FE906 |
|
Engine
Fastbuild TSIO-550 (Pressurized) Lancair installs baffling,
hoses, prop governor, vibration isolators, attach control
cable brackets, 3rd intercooler, modify turbo bracket, torque
and inspect. Price does not include powder coating or probe
install. If Engine Fastbuild is paid for at the time of kit
delivery, a $2,000 credit will apply to the price of your
engine when ordered through Lancair. |
|
$11,675.00
Each |
| FF906-307 |
|
Firewall
Fastbuild IV/IV-P, TSIO/IO-550 (Includes gascolator, mixer
box (press), cabin heat valve (non-press), control cable assembly,
bulkhead fittings, installation of firewall blanket &
hardware.) |
|
$3,350.00
Each |
| 20ALT |
|
Standby
Alternator for Dual Alt/Dual Batt |
|
$780.00
Each |
| SD20/SB1A-14KT/-28KT |
|
Standby
Alternator Kit (Includes alternator, standby voltage regulator
and wiring) |
|
$1,250.00
Each |
|
|
|
|
|
| Firewall
Forward Accessories |
|
Note:
If you are ordering the Firewall Fastbuild or Engine Fastbuild,
some of these items may be included in the programs. |
|
|
| LIVF-BF198 |
|
Baffling
Kit for TSIO-550E (Aluminum panels, silicone, hardware, etc.) |
|
$1,115.00
Each |
| LES-550-BF |
|
Baffling
Kit for IO-550N (Aluminum panels, silicone, hardware, etc.)
*This baffling is for the "N" model engine. Baffling
kit must be modified to fit the "G" model engine.
|
|
$1,075.00
Each |
| BF-MAT-LIV-198 |
|
Die
Cut Baffling Seals |
|
$550.00
Each |
| LIVF-HOSE |
|
Hose
kit for TSIO-550 |
|
$1,950.00
Each |
| HOSE-IO550 |
|
Hose
kit for IO-550 |
|
$1,040.00
Each |
| CABLE-TSIO550 |
|
Cable
Kit for TSIO-550 (Throttle, prop, mixture cables and hardware)
Included in Firewall Fastbuild |
|
$245.00
Each |
| CABLE-IO550 |
|
Cable
Kit for IO-550 (Throttle, prop, mixture cables and hardware)
Included in Firewall Fastbuild |
|
$275.00
Each |
| A740-BK-6 |
|
Oil
Cooler Door Cable (Included in baffling kit) |
|
$26.00
Each |
| VB-12V-A |
|
Battery
Box (12/14 volt) |
|
$165.00
Each |
| VB-24V-A |
|
Battery
Box (24/28 volt) |
|
$165.00
Each |
| D20309-39 |
|
McCauley
Prop Governor (non-feathering prop only) |
|
$1,485.00
Each |
| D20676-2 |
|
McCauley
Prop Governor (feathering prop only) |
|
$2,450.00
Each |
| 94001-01 |
|
High
Temperature Engine Vibration Isolators 4 required, TSIO-550
*Also order 4 "AN7-33A" bolts |
|
$130.00
Each |
| LES-550-VC |
|
Vacuum
Pump Kit IV |
|
$1,550.00
Each |
| LIVF-VC-P |
|
Vacuum
Pump Kit IV-P |
|
$1,690.00
Each |
| SD20/SB1A-14KT |
|
Standby
Alternator with Voltage Regulator 14 volt |
|
$1,250.00
Each |
| SD20/SB1A-28KT |
|
Standby
Alternator with Voltage Regulator 28 volt |
|
$1,250.00
Each |
| LR3C-14 |
|
Voltage
Regulator 14 volt |
|
$250.00
Each |
| LR3C-28 |
|
Voltage
Regulator 28 volt |
|
$250.00
Each |
| S-1-8 |
|
Hartzell Prop Governor
(non-feathering prop TSIO-550/IO-550 only) |
|
$1,435.00 Each |
| SB1B-28 |
|
B
& C Voltage Regulator 24/28 volt (Used with single alt/dual
battery in addition to the LR3C-28 voltage regulator) |
|
$270.00
Each |
| SB1B-14 |
|
B & C Voltage
Regulator 12/14 volt (Used with single alt/dual battery in
addition to the LR3C-28 voltage regulator) |
|
$270.00
Each |
| 903-0021 |
|
Power Grid for IV/IV-P,
Dual Alt/Dual Battery, 24/28 volt |
|
$1,200.00
Each |
| 903-0019 |
|
Power
Grid for IV/IV-P, Dual Alt/Single Battery, 24/28 volt |
|
$1,200.00
Each |
| 903-0020 |
|
Power Grid for IV/IV-P,
Single Alt/Sin |
|
$1,200.00
Each |
| 504-A |
|
Gascolator/Filter |
|
$400.00
Each |
|
|
|
|
|
| Tools |
|
|
|
|
| SP-008A-PT |
|
Silver
Plate Copper Coating (1 pint) (Used as ground plane for external
antennas) |
|
$100.00
Each |
| ACE-LG |
|
Large
Acetone Dispenser |
|
$55.00
Each |
| RC-1 |
|
Rotary
Cutter |
|
$25.00
Each |
| RB-1 |
|
Extra
Blade |
|
$4.00
Each |
| 801-0004 |
|
Tow
Bar |
|
$175.00
Each |
| TB-1-05 |
|
Tow
Bar Attach Plate (bent) |
|
$35.00
Each |
| 25-100 |
|
Jeffco
Epoxy Pump (Ideal for dispensing epoxy/hardener. Gives an
accurate mix of hardener to epoxy resin) |
|
$290.00
Each |
| C-200 |
|
Cleco
Pliers |
|
$9.80
Each |
| C-1/8 |
|
Clecos
(30 needed at .55 cents each) |
|
$16.50
Each |
| 9360-QT |
|
Hysol |
|
$104.00 Each |
| WLS-PRM |
|
WLS
Primer |
|
$139.00
Each |
| KT0054 |
|
Perma-Grit
Burr kit for Die Grinder 1/8" (7 piece) |
|
$75.00
Each |
| KT0063 |
|
Smart Toll Level Module |
|
$120.00
Each
|
| KT0065 |
|
Die Grinder Mini Air 1/8" |
|
$50.00
Each |
| KT0064 |
|
Diamond Mini-cutting Discs w/
1/8" shank (5 piece) |
|
$15.00
Each |
| JA-2 |
|
Jacks (Set of 2) Fit into jack
points for gear retraction testing. |
|
$900.00/Set |
|
|
|
|
|
