Options and Accessories
Prices as of January 2009 |
| |
R-IO-550N |
|
310 hp, Factory Remanufactured Engine
No Core Required. Same standards as new engine. Some parts may be refurbished by
TCM. *Only New Cylinder assemblies are used. |
$46,050.00 |
EA |
| |
IO-550N19B |
|
310 hp, Continental (12v, 60 amp, a/c bolt) |
$58,050.00 |
EA |
| |
IO-550N8B |
|
310 hp, Continental (24v, 100 amp, a/c bolt) |
$59,100.00 |
EA |
| |
IO-550 N34B |
|
310 hp, Continental (24v, 60 amp, a/c bolt) |
$59,100.00 |
EA |
| |
IO-550N20B |
|
310 hp, Continental Platinum (12v, 60 amp, a/c bolt)*5 yr. Warranty |
$65,000.00 |
EA |
| |
IO-550N21B |
|
310 hp, Continental Platinum (24v, 60 amp, a/c bolt)*5 yr. Warranty |
$65,000.00 |
EA |
| |
IO-550N22B |
|
310 hp, Continental Platinum (24v, 100 amp, a/c bolt)*5 yr. Warranty |
$65,000.00 |
EA |
| |
IO-540-V4A5 |
|
260 hp, Lycoming (12v) |
$49,000.00 |
EA |
| |
MTV-9-D/183-50a |
|
MT Propeller with Spinner Assembly, 3 blade,
hydraulic constant speed, 72'' dia., 56 lbs. For electrical
de-ice boots add $400.00 per blade. (*Crating
$200.00 or UPS fee of $380.00 is add'l) |
$12,250.00 |
EA |
| |
MTV-9-D-C/C183-50a |
|
MT Propeller with Spinner Assembly, 3 blade,
hydraulic constant speed, counterweighted 72'' dia., 60 lbs. For electrical de-ice add $400 per blade. (*Crating $200.00 or UPS fee of $380.00 is add'l.) |
$13,250.00 |
EA |
| |
MTV-9-D-C-F/CF183-50a |
|
MT Propeller with Spinner Assembly, 3 blade,
hydraulic constant speed, counterweighted, feathering 72'' dia., 61 lbs.* For electrical de-ice add $400 per
blade. (*Crating $200.00 or UPS feeof $380.00 add'l) |
$13,950.00 |
EA |
| |
HC-J3YF-1RF/F7391D-3 |
|
Hartzell Propeller (for use with IO-550) 3
blade, constant speed, 70'' dia., 73 lbs. |
$11,075.00 |
EA |
| |
HC-F3YR-1ARF/F8468D-14 |
|
Hartzell Propeller (for use with IO-540) 2
blade, constant speed, 72'' dia., est. 79 lbs. |
$11,600.00 |
EA |
| |
A-2295-P |
|
Spinner Hartzell Aluminum (2 blade IO-550/IO-540) 13.7 " dia. |
$950.00 |
EA |
| |
A-2295-1P |
|
Spinner Hartzell Aluminum (3 blade IO-550) 13.7 " dia. |
$950.00 |
EA |
| *2 Blade Hartzell Propellers for IO-550
& IO-540 are available. Call for Prices. |
| |
| |
A-CAN-L2K |
|
Canopy Fastbuild Assy-Carbon Frame & Stiffener |
$4,000.00 |
EA |
| |
Cowl Upgrade |
|
Upgrade to Carbon Cowls (Fiberglass cowls included
in kit) *Cost of upgrade will be added to kit cost. |
$1,250.00 |
EA |
| |
802-0001 |
|
Remote Oil Door (Open oil door from inside cabin) |
$225.00 |
EA |
| |
Upgrade-Adj Ped |
|
Adjustable Rudder Pedals, Pilot
only (Includes adjustable
pedal assy and attachment hardware. Rudder pedal and cables are shipped in
the kit.) |
$1,350.00 |
EA |
| |
4925-02 |
|
Adjustable Rudder Pedal Assembly, Co-Pilot
(Includes rudder pedals, pedal castings, master
cylinder, and attachment hardware) |
$1,875.00 |
EA |
| |
435-0024 |
|
Starflight Legacy Rudder Pedals – Hanging adjustable rudder pedals. Easily adjusted by pilot. Provides precise, smooth rudder and brake control. Bolts to side of airframe and firewall. 2 required if co-pilot controls are needed. Includes mounting hardware. *Does not include Co-Pilot brake master cylinders, rudder cables, misc. hardware. |
$1,245.00 |
EA |
| |
435-0025 |
|
Brake/Rudder Controls, Co-Pilot Starflight Pedals (Includes rudder cables, master cylinders, nylaflow tubing & hardware) |
$585.00 |
EA |
| |
4938 |
|
Right Side Brake Option (When
using standard pedals) |
$900.00 |
EA |
| |
4937-A |
|
Pitot Static System 12v (Includes the heated pitot tube (AN5812), air
pressure switch (710), static port, tubing and fittings) |
$2,100.00 |
EA |
| |
4937-24-A |
|
Pitot Static System 24v |
$1,625.00 |
EA |
| |
4937-A-EXP |
|
Pitot Static System 12v (Experimental) Includes the heated experimental
pitot tube, air pressure switch (710), static port, tubing, and fittings. |
$1,025.00 |
EA |
| |
4937-24-A-EXP |
|
Pitot Static System 24v (Experimental) Includes the heated experimental
pitot tube (24-AN5812), air pressure switch (710), static port, tubing, and fittings. |
$1,025.00 |
EA |
| |
AN5812-12-A |
|
Pitot Tube (heated) 12v
(Included in the Pitot Static
System, pn# 4937-A) |
$1,700.00 |
EA |
| |
AN5812-1-A |
|
Pitot Tube (heated) 24v
(Included in the Pitot Static System, pn# 4937-24-A) |
$1,200.00 |
EA |
| |
710 |
|
Airspeed Pressure Switch (Prevents
accidental landing gear retraction below a pre-set airspeed; included in
Pitot Static System pn# 4937-A) |
$385.00 |
EA |
| |
KEV0110 |
|
Screw Mount Eyeball Vent, Silver (square mount - 4
screws, 2 needed) |
$120.00 |
EA |
| |
800-0025 |
|
Panel Mount Eyeball Vent, Black (round mount-screw
on nut) |
$70.00 |
EA |
| |
800-0026 |
|
Plenum Cup for the Eyeball Vent (screw mount) |
$10.00 |
EA |
| |
4933 |
|
Cabin Heat Assembly (Includes; cabin heat manifold,
heat adapter, clamps, sceet & scat tubing, cable & hardware) |
$560.00 |
EA |
| |
4943 |
|
Avionics Shelf, 19x45 Prepreg (Mounts onto firewall
behind instrument panel. Used to mount add'l avionics equipment.) |
$255.00 |
EA |
| |
1106-01 |
|
Seat Belts (2 required) |
$95.00 |
EA |
| |
1106-02 |
|
Shoulder Harness (2 required) |
$125.00 |
EA |
| |
4530 |
|
Speedbrake Pocket Cover (2 required) |
$40.00 |
EA |
| |
4915 |
|
Inertial Reel Seat Belt/Harness-black (2 required) |
$500.00 |
EA |
| |
4934-12 |
|
Precise Flight Speedbrakes 12v |
$3,525.00 |
EA |
| |
4934-24 |
|
Precise Flight Speedbrakes 24v |
$3,525.00 |
EA |
| |
5455-A |
|
Electric Fuel Boost Pump Assembly
12v (IO-550) |
$940.00 |
EA |
| |
5456-A |
|
Electric Fuel Boost Pump Assembly 12v
(IO-540) |
$825.00 |
EA |
| |
5457-A |
|
Electric Fuel Boost Pump Assembly
24v (IO-550) |
$1,000.00 |
EA |
| |
5458-A |
|
Electric Fuel Boost Pump Assembly 24v (IO-540) |
$900.00 |
EA |
| |
4808A |
|
Fuel Selector Valve (IO-550) |
$650.00 |
EA |
| |
EFS25-2-2B-M |
|
Fuel Selector Valve (IO-540) |
$365.00 |
EA |
| |
LR3C-14 |
|
B & C Voltage Regulator 12v (Used with single alt/single battery) |
$250.00 |
EA |
| |
LR3C-28 |
|
B & C Voltage Regulator 24v (Used with single alt/single battery) |
$250.00 |
EA |
| |
SB1B-28 |
|
B & C Voltage Regulator 24v (Used with dual alt/single battery in
addition to the LR3C-28 voltage regulator) |
$275.00 |
EA |
| |
SB1B-14 |
|
B & C Voltage Regulator 12v (Used with dual alt/single battery in
addition to the LR3C-14 voltage regulator) |
$275.00 |
EA |
| |
LS1A |
|
B & C Voltage Regulator 24v (Used with dual alt/dual battery in
addition to the LR3C-28 voltage regulator. |
$280.00 |
EA |
| |
RG-35-12 |
|
Battery, Concorde (35 amp, 12v) |
$235.00 |
EA |
| |
RG-35XC-12 |
|
Battery, Concorde (12v, extra cranking) |
$250.00 |
EA |
| |
RG-24-11M |
|
Battery, Concorde (24v) |
$425.00 |
EA |
| |
BC116-1 |
|
Battery, Back-Up (16 amp hour, 12v) |
$160.00 |
EA |
| |
BC102-2 |
|
Battery, Back-up (7.2 amp hour, 24v) |
$95.00 |
EA |
| |
A600 or A600-28 |
|
External Position Lights 12v or 24v (Includes wingtip position/strobe lights, power supply and
wiring.) |
$975.00 |
EA |
| |
4927or 4927-28 |
|
Taxi/Landing Light Kit 12v or 24v (Right side) (Mounts in the inboard section of the
right stub wing, includes 2 lights, lens, mounting flange and hardware.) |
$350.00 |
EA |
| |
4926 or 4926-28 |
|
Taxi/Landing Light Kit 12v or 24v (Left side) (Mounts in the inboard section of the
left stub wing, includes 2 lights, lens, mounting flange and hardware.) |
$350.00 |
EA |
| |
800-0001or 800-0002 |
|
Landing Light Kit 12v or 24v, 2.2''
dia. (Installed on main gear or cowl inlets.) |
$225.00 |
PR |
| |
WICK-KIT |
|
Static Wick Kit- Mounting plate bonded to flight surface. |
$750.00 |
EA |
| |
KSW0113-8 |
|
Static Wick Kit (8 pcs) Embedded style/knurled finish. (Incl.
holders, braid & hardware). |
$600.00 |
EA |
| |
KSW0113-10 |
|
Static Wick Kit (10 pcs) |
$760.00 |
EA |
| |
KSW0113-15 |
|
Static wick Kit (15pcs) |
$1,140.00 |
EA |
| |
KSW0113 |
|
Static Wick Holder Only |
$9.75 |
EA |
| |
4630 or 4630-24 |
|
Inflatable Canopy Seal/Pump Assy 12v
or 24v (Includes inflatable door seal, check valve,
pump, switch, fittings, and clamps.) |
$965.00 |
EA |
| |
4941 |
|
Airframe Hydraulic/Fuel Hose Kit IO-550 (This kit provides pre-made flex lines for fuel and hydraulic
systems. Hard lines are not included and will need to be made with aluminum
tubing & fittings provided in kit.) |
$3,500.00 |
EA |
| |
800-0022 |
|
Fuel Lines (No assembly required) (All fuel lines are pre-fabricated hard & flex lines) |
$1,660.00 |
EA |
| |
800-0023 |
|
Hydraulic Lines (No assembly required) (All hydraulic lines are pre-fabricated hard & flex lines) |
$3,150.00 |
EA |
| |
401-0000 |
|
Wire Harness for Wingtip Nav Antenna (Can be installed during 1 week Build Program) *Ordered through Lancair Avionics. |
$65.00 |
EA |
| |
EDS-D2IP |
|
Oxygen System (Built-in, 2 place) |
$4,995.00 |
EA |
| |
4028 |
|
Instrument Panel - Fiberglass (raised
center console) |
$185.00 |
EA |
| |
226-0007 |
|
Instrument Panel -Fiberglass (side x side Chelton
system/canted radio stack) |
$255.00 |
EA |
| |
4028-01 |
|
Dust Cover/Glare Shield - Fiberglass (For PN# 4028 only) |
$60.00 |
EA |
| |
P-300C-6 |
|
Electronic Int'l Fuel Probe - 72" (2 Required) |
$195.00 |
EA |
| |
CI122 |
|
Com 1 / Com 2 (External) Antennas (2 antennas prefered) |
$195.00 |
EA |
| |
CI102 |
|
Marker Beacon |
$135.00 |
EA |
| |
CI305 |
|
X-ponder/DME |
$250.00 |
EA |
| |
903-0007 |
|
Power Distribution Grid 12v (Dual Alt/Single Battery) |
$1,250.00 |
EA |
| |
903-0008 |
|
Power Distribution Grid 24v (Dual Alt/Single Battery) |
$1,250.00 |
EA |
| |
903-0011 |
|
Power Distribution Grid 24v (Dual Alt/Dual Battery) |
$1,200.00 |
EA |
| |
903-0012 |
|
Power Distribution Grid 24v (Single Alt/Single Battery) |
$1,200.00 |
EA |
| |
4355 |
|
ELT Bracket (For Artex ELT-200) |
$85.00 |
EA |
| |
4039-02 |
|
Trutrack Autopilot Bulkhead |
$375.00 |
EA |
| |
4039-01 |
|
Trutrack Autopilot (pitch) Bracket |
$100.00 |
EA |
| |
4080 |
|
Trutrack Autopilot (roll) Bracket |
$85.00 |
EA |
| |
4910 |
|
Interior Baggage Floorboard Option |
$600.00 |
EA |
| |
4079-01 |
|
CD/Flight Guide Holder (left) |
$50.00 |
EA |
| |
4079-02 |
|
CD/Flight Guide Holder (right) |
$50.00 |
EA |
| |
802-0002 |
|
Soundproofing Panels 1'' x 2' x 3'' (3 needed) |
$125.00 |
EA |
| |
4090-01/-02 |
|
Longeron Closeout Right & Left (Covers wiring down side of fuselage) |
$75.00 |
EA |
| |
4855 |
(EF) |
Throttle, Prop, Mixture Cable Kit IO-550 (Includes
mixture, throttle, prop cables, rod ends and attach brackets.) *This is not in the Firewall Fastbuild
Kit. This option is incl. in the Engine Fastbuild Kit, pn# 4885-108.
|
$310.00 |
EA |
| |
4856 |
|
Throttle, Prop, Mixture Cable Kit IO-540 (Includes mixture, throttle, prop cables, rod ends and attach
brackets.) |
TBD |
EA |
| |
S-1-8 |
(EF) |
Hartzell Prop Governor (non
feathering prop only) |
$1,850.00 |
EA |
| |
D20309-39 |
(EF) |
McCauley Prop Governor IO-550 |
$1,900.00 |
EA |
| |
D20893-19 |
(EF) |
McCauleyProp Governor IO-540 |
$2,075.00 |
EA |
| |
A1635-212 |
|
Attach Screw IO-540 (prop governor
only, 4 required) |
$12.00 |
EA |
| |
4851-A |
(EF) |
Engine Baffling IO-550 |
$1,450.00 |
EA |
| |
94001-01 |
(EF) |
Engine Vibration Isolators, High Temp IO-550 (4 required *Also will need 4 "AN7-33A" bolts if ordered
separately.) |
$160.00 |
EA |
| |
J-9613-12 |
|
Engine Vibration Isolators IO-540 (4
required) |
$110.00 |
EA |
| |
4931-BY |
(FF) |
Gascolator Kit with Bypass Filter (Includes
shroud & mounting hardware.) |
$600.00 |
EA |
| |
4865 |
(EF) |
Exhaust IO-550 |
$2,250.00 |
EA |
| |
4866 |
|
Exhaust IO-540 |
$2,850.00 |
EA |
| |
LES-550-VC |
|
Vacuum System IO-550 |
$2,100.00 |
EA |
| |
4867-A |
|
Ram Air Induction Kit IO-550 (Air intake system with
filter & by-pass. Increases manifold pressure) *Can be
installed on the engine during Fastbuild for an additional $75.00 |
$675.00 |
EA |
| |
VB-12V-ES |
|
Battery Box, Flush Mount 12v (used with RG-35 series battery) |
$210.00 |
EA |
| |
VB-24V-ES |
|
Battery Box, Flush Mount 24v (used with RG-24-11M battery) |
$210.00 |
EA |
| |
4868 |
|
Battery Box, Small (for back up battery BC116-1) 12v |
$185.00 |
EA |
| |
230-0004 |
|
Battery Box, Small (for back up battery BC102-2) 24v |
$120.00 |
EA |
| |
SD20S |
|
Alternator Only (Use with a Dual
Alt/Dual Battery system) |
$780.00 |
EA |
| |
4857 |
(EF) |
Hose Kit for Engine IO-550N (This kit provides
pre-made hoses and necessary lines for fuel and oil for engine.) |
$1,260.00 |
EA |
| |
4880-108 |
|
Firewall Fastbuild IO-550N
(Includes the installation of the firewall blanket, brake reservoir, bulkhead
connectors, & cable pass-throughs). *If option 4933 is ordered, we will install the cabin heat valve
on the firewall. |
$3,200.00 |
EA |
| |
4885-108 |
|
Complete Engine Fastbuild by Lancair IO-550N (Kit
includes the installation of engine baffling, baffling seals, hoses, prop
governor, exhaust system, vibration isolators, cable kit (partially
installed) and other hardware. Bolts are torqued to
spec, sealed and engine inspected).*Pricing does not include: powder
coating, engine probe install or freight. *If this option is ordered at time
of kit delivery a $2000 credit will apply to engines ordered through Lancair.
|
$13,200.00 |
EA |
| |
4885-NF-108 |
|
Engine Fastbuild Components Kit IO-550N (PARTS ONLY)
(Kit
includes engine baffling, orange roll of baffling seal, hoses, prop governor,
exhaust system, cable kit & vibration isolators).
*This option is not
applicable if Lancair Fastbuilds your engine. |
$7,495.00 |
EA |
| |
SP-008A-PT |
|
Silver Plate Copper Coating (1 pint)
(Used as ground plane for external antennas) |
$100.00 |
EA |
| |
282 |
|
Carbon Fiber replaces fiberglass in kit at 4 yds
*Credit of $18.00 for
fiberglass with puchase of 4 yards of carbon. |
$60.00 |
YD |
| |
L2K-000 |
|
Canopy Covers; specify color, 3-4
Wks delivery (N # can be silk screened for an add'l. $35.00 - use pn#
SS-Covers) |
$435.00 |
EA |
| |
900-0003 |
|
Airframe Log Book, Green (*Required
by FAA) 5 3/4" x 7
3/4" |
$9.00 |
EA |
| |
900-0002 |
|
Engine Log Book, Red (*Required by
FAA) 5 3/4" x 7
3/4" |
$8.25 |
EA |
| |
900-0004 |
|
Propeller Log Book (*Required by FAA) 5 3/4" x 7
3/4" |
$6.95 |
EA |
| |
KID0120 |
|
I/D Plate with Lancair Logo |
$20.00 |
EA |
| |
09-33300 |
|
Decal Passenger Warning |
$2.50 |
EA |
| |
09-33400 |
|
Decal Experimental (2 1/2 "x 15") |
$7.00 |
EA |
| |
09-33500 |
|
Decal No Step |
$2.85 |
EA |
| |
ACE-LG |
|
Acetone Dispenser-Large |
$60.00 |
EA |
| |
25-100 |
|
Epoxy Pump |
$300.00 |
EA |
| |
C-1/8 |
|
Clecoes (40 recommended) |
$0.55 |
EA |
| |
C-200 |
|
Cleco Pliers |
$9.80 |
EA |
| |
RC-1 |
|
Rotary Cutter (w/blade) |
$25.00 |
EA |
| |
RB-1 |
|
Extra Blade (for RC-1) |
$4.00 |
EA |
| |
HPI |
|
Pitot Tube Heat Cover (with Lancair Logo) |
$18.00 |
EA |
| |
HPI-1 |
|
Pitot Tube Heat Cover |
$18.00 |
EA |
| |
KT0063 |
|
Smart Tool Level Digital Angle 23 5/8" (WHILE SUPPLIES LAST) |
$145.00 |
EA |
| |
KT0065 |
|
Die Grinder Mini Air 1/8'' |
$55.00 |
EA |
| |
KT0064 |
|
Diamond Mini-cutting Discs w/ 1/8'' shank (5 piece) |
$15.00 |
EA |
| |
KT0054 |
|
Perma-grit Burr for Die Grinder 1/8'' (7 piece) |
$75.00 |
EA |
| |
KRL0130A |
|
Rotisserie for the Legacy (Required
for transporting kit home) |
$1,000.00 |
EA |
| |
801-0004 |
|
Tow Bar |
$175.00 |
EA |
| |
TB-1-05 |
|
Tow Bar Plate (bent) |
$35.00 |
EA |
| |
WC-1 |
|
Wheel Chocks |
$20.00 |
PR |
| |
WLS-PRM |
|
WLS Primer |
$205.00 |
GAL |
| |
9394-QT |
|
Hysol Structural Adhesive
(Included in the build shop program) |
$165.00 |
QT |
| * Ask KCI about other
specialty tools that are available to assist in your building project. |
| * Paint and Upholstery - At builder's discretion. |
 |
